 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CCD Area Image Sensor MN39243FT 6 mm (type-1/3) high-sensitivity CCD area image sensor I Overview The MN39243FT is a 6 mm (type-1/3) interline transfer CCD (IT-CCD) solid state image sensor device. This device uses photodiodes in the optoelectric conversion section and CCDs for signal readout. The electronic shutter function has made an exposure time of 1/ 10 000 seconds possible. Further, this device has the features of high sensitivity, low noise, broad dynamic range, and super-low smear. This device has a total of 466 032 pixels (798 horizontal x 584 vertical) and provides stable and clear images with a resolution of 480 horizontal TV-lines and 420 vertical TV-lines. Part Number Size System PAL Color or B/W Color (Top View) I Pin Assignment OD R RD VO LG OG H2 H1 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 PW V4 V3 V2 V1 PT Sub IS MN39243FT 6 mm (type-1/3) I Features * Total number of pixels: 798 (horizontal) x 584 (vertical) * High sensitivity * Broad dynamic range (compared to our conventional CCD x1.2) * Low smear * Electronic shutter * No image distortion * Small size enables design of compact equipment * High reliability I Applications * Camcorders, surveillance cameras, door cameras 1 MN39243FT I Block Diagram CCD Area Image Sensor (2 columns OB + 753 columns valid area + 43 columns OB) 15 Vertical shift register PW (Internal connection) PW LG VO OD RD 16 (1 dummy + OB1 + 582 + OB1 + 2 dummies) V4 14 V3 13 12 V2 Photo diode 9 IS V1 16 5 4 1 3 Output section 10 Sub 11 PT Horizontal shift register 2 6 7 H2 OG R I Pin Descriptions Pin No. Symbol 1 2 3 4 5 6 7 8 OD R RD VO LG OG H2 H1 Descriptions Output drain Reset pulse Reset drain Video output Output load transistor gate Output gate Horizontal register clock pulse 2 Horizontal register clock pulse 1 Pin No. Symbol 9 10 11 12 13 14 15 16 IS Sub PT V1 V2 V3 V4 PW Descriptions Horizontal CCD input source Substrate P-well for protection circuit Vertical shift register clock pulse 1 Vertical shift register clock pulse 2 Vertical shift register clock pulse 3 Vertical shift register clock pulse 4 P-well 2 H1 8 CCD Area Image Sensor I Absolute Maximum Ratings and Operating Conditions Rating Parameter Reset drain voltage Output drain voltage Output load transistor gate voltage Output gate voltage Horizontal CCD input source voltage Protection P-well voltage P-well voltage Reset pulse voltage Horizontal register clock pulse voltage 1 Horizontal register clock pulse voltage 2 Vertical shift register clock pulse voltage 1 High-Low Bias Symbol VRD VOD VLG VOG VIS VPT *3, 4 MN39243FT Operating condition min 14.5 14.5 (Internal bias) (Internal bias) typ 15.0 15.0 max 15.5 15.5 Unit V V V V 15.0 -7.0 0 3.3 15.5 -6.7 3.6 V V V V V V min - 0.2 - 0.2 max 18.0 18.0 - 0.2 -9.0 - 0.2 - 0.2 - 0.2 -9.0 -9.0 -9.0 -9.0 - 0.2 -10 -30 18.0 0.2 14.5 -7.3 3.0 VPW VR(H-L) VR(Bias) *1 *1 Reference voltage 5.0 5.0 5.0 18.0 15.0 18.0 15.0 45.0 Supplied internally 3.0 - 0.1 3.0 - 0.1 14.5 - 0.2 -7.3 - 0.2 -7.3 14.5 - 0.2 -7.3 - 0.2 -7.3 3.3 0 3.3 0 15.0 0 -7.0 0 -7.0 15.0 0 -7.0 0 -7.0 3.6 0.1 3.6 0.1 15.5 0.2 -6.7 0.2 -6.7 15.5 0.2 -6.7 0.2 -6.7 VH1(H) VH1(L) VH2(H) VH2(L) VV1(H) VV1(M) VV1(L) VV2(M) VV2(L) VV3(H) VV3(M) VV3(L) VV4(M) VV4(L) VSub VSub *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *3, 4 *2 *2 V V Vertical shift register clock pulse voltage 2 Vertical shift register clock pulse voltage 3 V V Vertical shift register clock pulse voltage 4 Substrate voltage V Supplied internally 21.0 22.0 25 23.0 V C C Operating temperature Storage temperature Note) *1: Reset VR(H) Topr Tstg 70 80 *2: VSub when using electronic shutter function VSub High High-Low VSub VSub Low VSub (Supplied internally) VR(L) Bias GND GND - 0.2 < VV - VPT < 24.5 (V) *3: Absolute maximum rating *4: Relation between VPT and VV(L) Set VPT that is to meet the following conditions for VL voltage of the vertical shift clock waveform. VPT VL (VV1(L) to VV4(L)) 3 MN39243FT I Optical Characteristics Part Number MN39243FT Color or B/W Color Effective pixels H 737 V 575 Saturation output typ (mV) 750 CCD Area Image Sensor Sensitivity Vertical smear Horizontal Vertical F8 Sm resolution resolution typ (mV) typ (dB) typ (TV-lines) typ (TV-lines) 450 -100 480 420 I Graph of Characteristics CCD color filter spectral characteristics 100.0 Ye 90.0 Mg 80.0 70.0 Relative sensitivity (%) 60.0 50.0 Gr 40.0 Cy 30.0 20.0 10.0 0.0 400 450 500 550 600 650 700 Wavelength (nm) 4 CCD Area Image Sensor I Timing Diagram * High speed pulse timing MN39243FT H2 50% 50% 50% 34.9 ns 3 ns CCD output R 50% 50% 3.2 ns 3 ns 13.0 ns 3 ns Clamp pulse (DS1) 50% 50% 6.7 ns +3.0 ns -2.7 ns 17.5 ns 3 ns Sampling pulse (DS2) 50% 4.3 ns +3.0 ns -2.7 ns 50% 17.5 ns 3 ns 5 MN39243FT I Timing Diagram (continued) * Rise time and fall time of each pulse CCD Area Image Sensor V1 , V3 0.9 0.9 0.1 0.9 0.1 0.9 0.1 300 ns V2 , V4 300 ns 300 ns 0.1 300 ns 0.9 0.9 0.1 300 ns H1 , H2 , R 0.9 0.9 0.1 300 ns DS1, DS2 0.9 0.9 0.1 10 ns 0.1 10 ns 0.1 10 ns 0.1 10 ns I Package Dimensions (unit: mm) * WDIP016-P-0500C 14.000.08 7.000.08 16 9 Mounting position-Up Reference plane 6.200.08 12.400.08 (12.77) 11.400.10 0.015 CCD (0.38) (R 0.50) Valid pixel center CCD Refractive index : 1.5 11.400.10 (0.60) (0.77) 1.78 0.460.05 0.46 M 6 3.900.20 1.300.10 0.80 (1.30) 3.400.15 0.250.05 1 8 Mounting position-Bottom 12.700.25 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of MN39243FT
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |